Reverse Osmosis Systems-BWB series

$0.00

BWB reverse osmosis systems are used for bore water treatment or with feedwaters where TDS values may be up to 10,000ppm.

SKU: BWB Category:

Description

Overview

BWB reverse osmosis systems are used for treating most bore water types, for treatment of feedwaters with TDS values up to 10,000ppm, or where a permeate flush feature is required.

RO pressure vessels are FRP high pressure types with high performance membranes and the open frame is electro-polished 304 grade stainless-steel.

Metal wetted surfaces are 316 grade stainless steel or corrosion resistant brass.

A permeate flush facility is standard and operates each time the system is started and every 3 hours thereafter to assist with keeping the membranes clean.

An optional booster pump is available for integration into the system should a pressurised feed from the RO permeate storage tank not be available.

Continual monitoring of feedwater pressure, RO permeate quality and storage tank level is performed by the programmable PLC.

Features

RO System Features

  • Stainless steel frame open frame
  • Schedule 80 rigid pipe work
  • High pressure S/S braided flexible hoses
  • Stainless steel control valves and pump
  • Programmable PLC  controller
  • Low feedwater pressure sensor
  • Permeate quality sensor & conductivity display
  • Storage tank level sensor input (24 VDC)
  • Permeate and reject flow rotameters
  • Adjustable pressure regulator valve
  • Permeate flush
  • Panel mount pressure gauges
  • Electrical mimic panel with status indicators

Specifications

Specifications/Models

BWB-5-1
BWB-5-5
BWB-5-10

BWB-10-1
BWB-10-5
BWB-10-10

BWB-15-1
BWB-15-5
BWB-15-10

BWB-20-1
BWB-20-5
BWB-20-10
Capacity (litres/day) @ 25°C

5,000

10,000

15,000

20,000
Operating pressure (kPa)

1050-1600 (1750 maximum)
Pre-filtration (standard)

20″ filter housing with 2.5″x20″ 5μm PP element
Pressure pump

Vertical multi-stage 304 or 316 grade stainless steel
Pump rating (KW)

1.5

2.2

2.2

2.7
Membrane type

Thin film composite with FRP outer wrap to suit feedwater
Membrane number & size

1 x 4″x40″

2 x 4″x40″

3 x 4″x40″

4 x 4″x40″
Membrane pressure vessel

FRP (rated to 2050kPa)
Flow meters

RO permeate and reject streams
Pressure gauges

Feedwater inlet, pump discharge, membrane discharge
Quality monitor

TDS monitor with LCD (optional conductivity monitor available)
Electrical controls

PLC, overload breakers, LED indicators
Power

220-240VAC 50hZ single phase or 415VAC 3 phase (optional)
Frame

AISI 304 grade stainless steel, electro polished
Dimensions

600 x 480 x 1550 mm (LWH)

 

Typical operating conditions
Max Operating pressure

1750kPa
Maximum recovery

75%
Nominal rejection

98-99%
Operating temperature

+5 to 45°C

 

Feedwater requirements
pH

3.0 to 10.0
TDS (ppm)

<1000, <5000, < 10,000
Turbidity

< 1.0 NTU
SDI

< 5.0
Hardness

< 5.0 ppm
Chlorine

< 0.1 ppm

Related products